Gettin' Learnt on Yocan Uni

Preparing the Yocan Uni Box Mod Vaporizer 

  1. Ensure that the Yocan UNI Box Mod is fully charge before every use for best results.
  2. Once the battery is charged, power the Yocan UNI Box Mod Vaporizer on by tapping on the power button 5 times. Note: The power button is located at the back of the battery where you have the part where you can see the contents of the cartridge facing outwards. The power button is the circular button at the back located just above the engraved Yocan logo.

Loading the Yocan UNI Box Mod Vaporizer 

  1. Prepare your cartridges, place them somewhere where there’s a stable platform so the cartridges won’t roll over or fall off the table.
  2. Connect your cartridge to the included 510-threaded magnetic connector.
  3. Set the 510-threaded attachment from your cartridge to the receiving end of the magnetic adapter. Twist the magnetic adapter until tight. Note: Do not over tighten the magnetic adapter as it may cause the threads to get loose. This may cause other cartridges to experience a loose connection affecting the flow of electricity and the overall performance of the Yocan UNI Box Mod Vaporizer.
  4. Once the adapter is connected to the cartridge, you may slide the cartridge down to the Yocan UNI Box Mod Chamber until you hear a satisfactory snap.
  5. Use the corresponding adjustment tools to secure the cartridge in place. The width and the girth of the cartridge can be adjusted to fit the chamber by twisting the aperture adjustment tool. Do this so the cartridge will not rattle inside the chamber. Should your cartridge be lacking in height, the height adjustment tool can be used with three height settings. Bottom, medium, and high.

Vaping with the Yocan UNI Box Mod Vaporizer 

  1. Make sure that the Yocan UNI Box Mod Vaporizer is charged and is loaded with your select cartridge before you start vaping.
  2. Once the Yocan UNI Box Mod Vaporizer is loaded, press your lips on the mouthpiece of the cartridge and prepare to draw.
  3. Press and hold the power button of the Yocan UNI Box Mod and once the Yocan UNI Box Mod Vaporizer generates vapors inhale from the mouthpiece of the cartridge.
  4. Repeat this process as necessary or as the e-liquid is fully consumed.

Care and Maintenance of the Yocan UNI Box Mod Vaporizer 

The Yocan UNI Box Mod Vaporizer was made to accommodate a wide variety of cartridges. The UNI in itself is just a box mod battery with no atomizers on it. To ensure your Yocan UNI Box Mod Vaporizer stays in good shape, follow the steps below. 

  1. Wipe-off any liquid residue on the vaporizer with a dry paper towel and continue with reassembling the Yocan UNI Box Mod Vaporizer.
  2. Make sure to follow charging instructions and use the dedicated charger to avoid damaging the UNI Box Mod battery.

Leave a comment