Gettin' Learnt on Yocan Trio

Preparing the Yocan Trio Vaporizer

  1. Make sure that your Yocan Trio Vaporizer is fully charged.
  2. Plug the USB charging cable to a wall adapter, a computer, or a laptop and connect the micro USB to the Yocan Trio Vaporizer.
  3. Once fully charged, remove the USB charging cable and turn on the Yocan Trio Vaporizer. Note: To power it on click the power button located at the middle of the battery 5 times. Performing the same action will turn the vaporizer off.

Loading the Yocan Trio Vaporizer Concentrate Pod

  1. To load the concentrate pod, look for the one that has a solid black hue.
  2. Take the mouthpiece off the concentrate pod by pulling the top part apart from the bottom part.
  3. Load your desired amount of concentrate onto the dual quartz pod coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates on the Yocan Trio Quartz Dual Coils.
  4. Return the top cover and attach the pod back to the battery.
  5. Wait for the magnetic connection to snap the pods back in place.

Loading the Yocan Trio Vaporizer E-Juice PodΒ 

  1. To load the e-juice pod, look for the one that’s translucent with white hue.
  2. Take the mouthpiece off the e-juice pod by pulling the top part apart from the bottom part.
  3. Remove the rubber cover that seals the pod and load your desired amount of e-liquid to the e-juice pod.
  4. Replace the rubber cover and reseat the mouthpiece onto the pod. Reattach the pod back to the battery.
  5. Wait for the magnetic connection to snap the pods back in place.

Loading the Yocan Trio Vaporizer Thick Oil Pod

  1. To load materials onto the thick oil pod, look for the one that is translucent with a green hue.
  2. Take the mouthpiece off the thick oil pod by pulling the top part apart from the bottom part.
  3. Lift the rubber cover that seals the pod and load your desired amount of thick oil to the thick oil pod.
  4. Reseal the rubber cover and replace the mouthpiece atop the pod. Reattach the pod back to the battery.
  5. Wait for the magnetic connection to snap the pods back in place.

Vaping with the Yocan Trio Vaporizer

  1. Ensure that your Yocan Trio Vaporizer is charged and is properly loaded with your select material before you begin vaping.
  2. Next, ensure that the pod of the Yocan Trio Vaporizer is loaded and is seated on the battery correctly. To do this simply pull the pod away from the battery, slide it in, and wait for the clicking sound from the magnets as it makes contact. Press your lips onto the mouthpiece and prepare to pull from the Yocan Trio Vaporizer.
  3. Press and hold the power button. Note: The power button is located at the middle of the battery just above the Trio logo, it is the circular, rubberized button that lights up when you press it.
  4. When the Yocan Trio Vaporizer begins vaporizing your materials, inhale and pull from the mouthpiece.
  5. Repeat this process as necessary or as the concentrates are fully consumed.

Toggling Between the Preset Heat Settings

The Yocan Trio Vaporizer is equipped with three preset heat profiles. Below are the corresponding light indicators for each temperature profile.

  • White Light: Low Setting
  • Blue Light: Medium Setting
  • Green Light: Hight Setting

To toggle between temperature settings, please follow the steps below.

  1. Turn the Yocan Trio Vaporizer on by clicking the power button 5 times.
  2. Toggle between the temperature profiles by clicking on the power button 3 times.
  3. To start the pre-heat mode, click the power button 2 times.
  4. Click the button twice again to stop the pre-heat function.

Leave a comment