Gettin' Learnt on Yocan Hive 2.0 - Freshly Baked

Preparing the Yocan Hive 2.0 Vaporizer

  1. Make sure that you get a full charge on the Yocan Hive 2.0 Vaporizer before use for best results.
  2. Once you have secured a full charge on the Yocan Hive 2.0 Vaporizer, power it on by clicking the power button 5 times. Note: The power button is the square button located at the upper part of the battery facing sideward.

Loading the Yocan Hive 2.0 Vaporizer Concentrate Atomizer

  1. Place your concentrates on any container where you can easily pick or scoop up your concentrates upon loading.
  2. Hold the wax concentrate chamber and pull it upwards to remove it, twist it counter clockwise to remove it from the magnetic adapter. This will detach the atomizer chamber from the battery itself and will allow you to safely load the wax concentrate atomizer.
  3. Remove the bottom part of the concentrate atomizer chamber to reveal the atomizer coil.
  4. Load a desired amount of wax concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop atomizer coil.
  5. Replace the bottom part by screwing it back clockwise. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.
  6. Reconnect the magnetic adapter.
  7. Replace the concentrate atomizer back to the battery.

Loading the Yocan Hive 2.0 Vaporizer E-Liquid Atomizer

  1. Put your e-liquids aside where you can easily get them or take them up upon loading.
  2. Hold the e-liquid chamber and pull it upwards to remove it, twist it counter clockwise to remove it from the magnetic adapter. This will detach the atomizer chamber from the battery itself and will allow you to safely load the e-juice atomizer.
  3. Remove the lid of the e-liquid atomizer chamber to reveal the filling hole.
  4. Load a desired amount of e-liquid onto the coil. Note: Make sure not to overfill the e-liquid atomizer chamber as it may result to spillage.
  5. Replace the lid. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.
  6. Reconnect the magnetic adapter.
  7. Replace the e-liquid atomizer back to the battery.

Switching Through the Temperature Settings

  1. Power the Yocan Hive 2.0 Vaporizer on by quickly pressing the power button 5 times.
  2. Tap the power button 3 times rapidly to select heat settings.
  3. Release the power button to allow the selected heat setting to take effect on the Yocan Hive 2.0 Vaporizer.

Below are the corresponding heat levels.

  • One Light: Low Setting
  • Two Light: Medium Setting
  • Three Light: High Setting

Vaping with the Yocan Hive 2.0 Vaporizer

  1. Ensure that the Yocan Hive 2.0 Vaporizer is fully charged and is loaded with the right kind of concentrate with the suitable on the atomizer before vaping.
  2. Once loaded, bring the mouthpiece close to your lips and prepare to inhale.
  3. Press and hold the power button to activate the heating mechanism. Once the Yocan Hive 2.0 Vaporizer starts producing vapors, draw and pull from the mouthpiece of the chamber.
  4. Repeat this process as necessary or as the concentrates or e-liquids are fully consumed.

Care and Maintenance of the Yocan Hive 2.0 Vaporizer

The Yocan Hive 2.0 Vaporizer have few components making it a solid box mod vaporizer and is likewise easy to clean and maintain. To clean your Yocan Hive 2.0 Vaporizer, follow the steps below.

  1. Disconnect the wax concentrate atomizer chamber and the e-juice chamber from the battery.
  2. Check for damages and decide whether to replace the broken atomizer parts.
  3. Wipe off the vaporizer and the parts with a dry paper towel.

Leave a comment