Preparing the Yocan Evolve-D Plus Vaporizer
- Ensure that you achieve a fully charged battery on your Yocan Evolve-D Plus Vaporizer before use for optimum results.
- Once you’ve managed to secure a full charge, power on the Yocan Evolve-D Plus Vaporizer battery. Click the power button 5 times rapidly. Note: The power button is the rectangular button located at the middle part of the battery facing outwards just above the Yocan Evolve Plus logo.
- Prime your coils by pressing and holding the power button for 3 to 5 seconds. Note: Priming you coils will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process. Perform this step especially if it’s the first time you’re using your Yocan Evolve-D Plus Vaporizer.
Loading the Yocan Evolve-D Plus Vaporizer
- First, get your fresh dry herb strains ready for loading. To do this, use a grinder to grind the botanicals into finer pieces that will allow more of the ground materials to touch and make contact with the heated coils. Note: You can use the integrated storage compartment to store your herbs on-the-go.
- Turn the mouthpiece counterclockwise to expose the dual herb coils on the Yocan Evolve-D Plus Vaporizer. The coils are made from 12 wraps of high-grade coils for better heating efficiency.
- Load desired amount of ground botanicals directly in the heating chamber. You can use an herb tool to scoop the ground botanicals or you may transfer the herbs directly from the grinder to the herb chamber. Note: Make sure to allow enough room for air to make its way from the heating element to the mouthpiece. Packing your herbs tight may cause a similarly tight airflow and you may have a hard time inhaling vapors from the Yocan Evolve-D Plus Vaporizer.
- Replace the mouthpiece by twisting the threaded connections clockwise. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.
Vaping with the Yocan Evolve-D Plus Vaporizer
- Make sure that the Yocan Evolve-D Plus Vaporizer is completely charged and is loaded with enough ground botanicals before you begin vaping.
- After the Yocan Evolve-D Plus Vaporizer is loaded, take the mouthpiece, hold it next to your lips and prepare to draw once your Yocan Evolve-D Plus Vaporizer is made ready.
- Press and hold the power button. This activates the heating element and vaporizes your dry herbs. After the Yocan Evolve-D Plus Vaporizer starts making vapors, inhale and pull from the vaporizer mouthpiece. Note: The Yocan Evolve-D Plus Vaporizer has a functional mouthpiece that acts as a tamping tool to press the herbs closer to the heating element while you’re vaping. This allows the Yocan Evolve-D Plus Vaporizer to take larger loads.
- Repeat this process as necessary or as the ground botanicals are fully consumed.
Care and Maintenance of the Yocan Evolve-D Plus Vaporizer
The Yocan Evolve-D Plus Vaporizer has few parts. This design and engineering make the Yocan Evolve-D Plus Vaporizer a sturdy device. Its uncomplicated construction makes it a vaporizer that is easy to maintain and clean. To clean your Yocan Evolve-D Plus Vaporizer, follow the steps below.
- Turn the vaporizer off. Tapping the power button five times rapidly will turn it on, tapping it 5 more times consecutively when the vaporizer is on will turn it off consequently.
- Remove the mouthpiece to gain access the herb chamber.
- Take the included cleaning brush and gently brush the dual coils.
- Replace the mouthpiece.