Gettin' Learnt on Yocan Evolve 2.0 - Freshly Baked

Preparing the Yocan Evolve 2.0 Vaporizer 

  1. Make sure that your Yocan Evolve 2.0 is fully charged.
  2. Connect the USB charging cable to a computer or a laptop and connect the micro USB to the Yocan Evolve 2.0 Vaporizer.
  3. Once charged, remove the USB charging cable and power on the Yocan Evolve 2.0 Vaporizer. Note: To power it on click the power button located at the middle of the battery 5 times. Performing the same action will turn the vaporizer off.

Loading the Yocan Evolve Plus 2.0 Vaporizer Concentrate Pod 

  1. To load the concentrate pod, look for the one that has a solid black color.
  2. Remove the mouthpiece of the concentrate pod by pulling the top part apart from the bottom part.
  3. Load desired amount of concentrate onto the pod coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates on the Yocan Evolve 2.0. Quartz Dual Coils.
  4. Replace the top cover and attach the pod back to the battery.

Loading the Yocan Evolve Plus 2.0 Vaporizer E-Juice Pod 

  1. To load the e-juice pod, look for the one that’s translucent with white cover.
  2. Remove mouthpiece of the e-juice pod by pulling the top part apart from the bottom part.
  3. Lift the rubber cover that seals the pod and load your desired amount of material to the e-juice pod.
  4. Reseal the rubber cover and replace the mouthpiece atop the pod. Reattach the pod back to the battery.

Loading the Yocan Evolve Plus 2.0 Vaporizer Thick Oil Pod

  1. To load the thick oil pod, look for the one that is translucent with green cover.
  2. Remove the mouthpiece of the thick oil pod by pulling the top part apart from the bottom part.
  3. Lift the rubber cover that seals the pod and load your desired amount of material to the thick oil pod.
  4. Reseal the rubber cover and replace the mouthpiece atop the pod. Reattach the pod back to the battery.

Vaping with the Yocan Evolve 2.0 Vaporizer 

  1. Ensure that your Yocan Evolve 2.0 Vaporizer is fully charged and is loaded with your choice of material before you begin your vaping session.
  2. Next, ensure that the pod of the Yocan Evolve 2.0 Vaporizer is loaded and is seated on the battery correctly. To do this simply pull the pod away from the battery, slide it in, and wait for the clicking sound from the magnets as it makes contact. Press your lips onto the mouthpiece and prepare to draw or inhale.
  3. Press and hold the power button. Note: The power button is located at the middle of the battery, it is the circular, rubberized button that lights up when you press it.
  4. When the Yocan Evolve 2.0 Vaporizer starts vaporizing your materials, inhale and pull from the mouthpiece.
  5. Repeat this process as necessary or as the concentrates are fully consumed.

Toggling Between the Preset Heat Settings 

The Yocan Evolve 2.0 Vaporizer is equipped with three preset heat profiles. Below are the corresponding light indicators for each temperature profile. 

  • White Light: Low Setting
  • Blue Light: Medium Setting
  • Green Light: Hight Setting

To toggle in between temperature settings, please follow the steps below. 

  1. Power the Yocan Evolve 2.0 Vaporizer on by clicking the power button 5 times.
  2. Toggle between the temperature profiles by clicking on the power button 3 times.
  3. To initiate the pre-heat mode, click the power button 2 times.
  4. Click the button twice again to stop the pre-heat function.

Leave a comment