Gettin' Learnt on Yocan Evolve - Freshly Baked

Preparing the Yocan Evolve Vaporizer

  1. Make sure that you charge the Yocan Evolve Vaporizer before use.
  2. Once you have secured a full charge, turn on the vaporizer battery by clicking the power button 5 times. Note: The power button is located at the middle part of the battery facing outwards just below the Yocan logo.
  3. Once the Yocan Evolve Vaporizer is turned on you can sterilize the heating element by pressing and holding the same power button for 5 seconds two or three consecutive times. Note: perform sterilization during the first time you receive your Yocan Evolve Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.
  4. Once you’re done with sterilization, you can let the vaporizer sit and rest for about 2 – 3 minutes. After which, you can now load your select concentrates to your Yocan Evolve Vaporizer.

Loading the Yocan Evolve Vaporizer

  1. Set your concentrates on a parchment paper, a jar, or any receptacle where you can safely scoop or pick your concentrates upon loading.
  2. Make sure you’ve prepared your Yocan Evolve Vaporizer first if it’s the first time you’re using it. Note: Follow steps for preparing the Yocan Evolve Vaporizer.
  3. Turn the mouthpiece counterclockwise to reveal the Yocan Quartz Dual Coils (QDC).
  4. Remove the coil cap by twisting it counter clockwise. Removing the mouthpiece exposes the coils that are covered with the coil cap.
  5. Load desired amount of concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop the QDC.
  6. Replace the coil cap and tighten it by turning it clockwise.
  7. Perform the same action to replace the mouthpiece. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.

Vaping with the Yocan Evolve Vaporizer

  1. Make sure that the Yocan Evolve Vaporizer is properly sterilized, properly charged, and is loaded before vaping.
  2. Once loaded, take the mouthpiece and press your lips against it and prepare to draw.
  3. Press and hold the power button at the same time and as the Yocan Evolve Vaporizer begins producing vapors, inhale and pull from the vaporizer.
  4. Repeat this process as necessary or as the concentrates are fully consumed.

Care and Maintenance of the Yocan Evolve Vaporizer

The Yocan Evolve Vaporizer has few parts which make it a solid device and is likewise easy to clean and maintain. To clean your Yocan Evolve Vaporizer, follow the steps below.

  1. Turn the vaporizer on. Five clicks will turn it on and five clicks turns it off.
  2. Turn the Yocan Evolve Vaporizer upside down.
  3. Perform a burn-off by pressing and holding the power button for 5 seconds. Repeat this process 2 – 3 times. This will cause any residue to melt or evaporate.
  4. Let the vaporizer cool down.
  5. Disassemble the Yocan Evolve Vaporizer by turning the threaded connections counter clockwise.
  6. Wipe off the vaporizer and the parts with a dry paper towel and reassemble.

Leave a comment