Gettin' Learnt on Vuber Pulse

How to use the Vuber Pulse

HOW TO USE:AUTOMATIC MODE:

Automatic mode is the default mode for your battery. When an atomizer is attached, the battery will read out the resistance, and recommend a power setting:

Step 1: Press button 5 times rapidly until you see the V logo come up on the LED screen.

Step 2: Attach Cartridge

Step 3: Press the button once with an atomizer attached to automatically adjust the recommended settings.

Step 4: Hold the button down and inhale. If you prefer a different setting, you can switch to “Manual Mode”.

MANUAL MODE

You can override the automatic settings of your battery by choosing manual mode. 

Step 1: Press button 5 times rapidly until you see the V logo come up on the LED screen.

Step 2: Attach Cartridge

Step 3: To cycle through the different temperatures, continue to press the button three times until you have reached your desired temperature. Temperature Settings:      • 2.8v      • 3.2v      • 3.4v      • 3.7v

Step 4: Once the desired temperature has been selected, hold the button down and inhale.

Note: You may go back to the automatic settings by removing the atomizer and attaching the same or different atom-izer.

Due to the Never Burn technology, each setting will still taper the power as you hold the button. This is not something you can override.

Warning: Manual mode is recommended for advanced users; user error may cause cartridges to taste burnt.

CHARGING

The Pulse is charged using a micro USB port on the bottom of the battery (charger included)      •   The LED screen shows the battery charging, and the amount of battery life left.      •  The Pulse can be charged using any normal USB port or wall adapter.      •   You may use your battery while it is being charged.      •   If you lose the charging cord that comes with the battery, you may use any USB charging cord that will fit in the port at the bottom of the battery or purchase a new charger on our website

Leave a comment