Gettin Learn't on Connect
Charge Device fully before seshing*
Charging out of box should take 3-4 hours to charge fully. The Connect uses an 850 mAh battery so it can go for a while before it needs to be recharged. Keep in mind, the longer your duration drops if you regularly use the Connect on the higher voltage settings and if you use manual heating a lot. Recharging can take an hour or two, but it is certainly easier than refilling a butane torch.
- Twist the glass adapter on to the bottom of the glass connector of the device.
- Insert the device into the joint of the dab rig.
- Remove the cap from the tank.
- Place your dab into the ceramic bowl and replace the cap.
- Attach the battery to the magnetic connection point.
- Turn on the device by pressing the battery button five times.
- Press the battery button three times to select a voltage level.
- Press the battery button twice to start automatic heating.
- (Optional) Hold down the battery button for fifteen second manual heating.
- Once heating is complete, hold down the carb release button to increase airflow.
- Inhale from the mouthpiece of the dab rig.